6 Tips to Maintain Your Video Security System for Better Performance

Simply installing a video security system does not ensure adequate security. You need to make sure that the system is in perfect working order so that optimal performance may be ensured. It’s a good idea to schedule regular system maintenance. This enables you to protect your investment and keep a check on the system’s performance. After all, you wouldn’t want to find out the flaws after a mishap has occurred.

Here are 6 tips that can help you maintain the performance levels of your video security system.

Clean the Camera Lenses

This is an absolute must for every video security system. The camera lenses need to be cleaned periodically to ensure proper video capturing and surveillance. When crimes are recorded on cameras, it is important that the image be clear in order to identify the infiltrators. Look for dust, smudges, water spots and other undesirable elements on your lenses. If they are dirty, then use air to blow out the debris and then use a microfiber cloth to wipe the lens gently.

Look for Signs of Corrosion

Check the connectors for possible corrosion. If present, it can cause the connections to short out and you can lose valuable footage in the process. This is a serious situation and you would not want to be left without evidence in the event an infiltration or robbery has occurred.

Remove Dust from the DVR

You need to take a look at your DVR regularly to remove the layer of dust that might have settled on it over time. The presence of dust may hamper the performance of the DVR. It doesn’t take a lot to keep it clean. Frequently wipe your security DVR with a microfiber cloth. Unless it is an absolute emergency, never remove the DVR from its enclosure. Even if you have to remove it, make sure you call in an expert to get the job done.

Inspect the Power Supplies

Check the power supplies for signs of fault or tampering. Get all repair work done in time or else it might affect the video security system. In case a UPS is involved, make sure that the battery is fully charged and the charging is being done properly. Also, find out if any warning signs are visible. If yes, the take the required course of action to rectify it. You’ll also want to use a voltmeter to guarantee that your cameras are getting their full power requirements. Too much or too little power can cause the camera to fail faster.

Check for Signs of Tampering

Video security systems can be tampered. In fact, infiltrators usually try to tamper the system in order to get blind spots that can be used to enter a facility without getting noticed. By conducting regular inspections, you can easily find out whether the camera or the recording system’s efficiency has been compromised.

Trim the Landscaping

The camera’s view must remain unblocked to provide a clear recording. If you find that externally placed cameras are getting blocked by branches or spider webs, then get rid of it before it’s too late. Even a slight delay can compromise the quality of your video security system, thereby increasing the risk to the area being monitored.